Gasket Sheet & PTFE Products
GASKET SHEET / JOINTING SHEET
Jointing Materials are sealants used for applications across chemical plants, refineries, and thermal applications. Jointing Sheets are cut out in various sizes to form a compressible leak-proof seal between two surfaces or components.
These Gasket Sheets are flexible and robust to be used in applications that involve acids, high temperature, corrosive chemicals gases or fluids. The flexibility and good recovery of these sheets prevent breakage during installation. Our imported Gasket Sheets comes in many grades and a wide range of thicknesses to allow for different sealing applications.
We deal in premium brands for this soft sealing material, it has been specifically designed to master the rigors of high-temperature sealing applications. It is the preferred choice for utilization scenarios involving exhaust pipes, turbines, turbochargers and fuel lines, and can withstand temperatures of up to 550 °C in continuous operation.
We deal in premium brands for this soft sealing material, it has been specifically designed to master the rigors of high-temperature sealing applications. It is the preferred choice for utilization scenarios involving exhaust pipes, turbines, turbochargers and fuel lines, and can withstand temperatures of up to 550 °C in continuous operation.
Our top notch material offers excellent resistance in areas such as temperature, mechanical or chemical, which are required by the corresponding target industry.
These sheets are divided into following categories:
- Asbestos Jointing Sheet
- Asbestos Jointing Sheet Graphite, with Wire
- Non-Asbestos Jointing Sheet
- Acidit Jointing Sheet
Available Brands: KLINGER, SANDA & TECNIT.
Operating Temperature: Up to 550 C
Maximum Pressure: Up to 130 bar
Thickness Range: 0.5 mm to 6 mm
Dimensions KLINGER: 60” X 80”
Dimensions SANDA/TECNIT: 1520 X 1360 MM
Operating Temperature: Up to 550 C
Maximum Pressure: Up to 200 bar
Thickness Range: 1 mm to 6 mm
Dimensions KLINGER: 60” X 80”
Dimensions SANDA/TECNIT: 1520 X 1360 MM
PTFE
PTFE (polytetrafluoroethylene), also known as Teflon, is a fluorocarbon-based synthetic polymer extensively utilized in various industries and products. For example, PTFE is a preferred material for electrical and thermal applications like coil separators and terminals, as well as high-temperature seals, insulators, and bearings due to its low coefficient of friction, excellent electrical properties, high chemical resistance, and stability over a wide range of temperatures
PTFE is used as a cost-effective solution for oil & gas, pharmaceutical, chemical processing, industrial, electrical/electronic, and construction sectors.
Available Brand: TBA
PURE PTFE PACKING
Pure PTFE is made from unadulterated PTFE resin with no added materials. It retains flexibility at low temperatures, is an excellent electrical insulator, and is very resistant to chemicals. Pure PTFE is widely utilized in food and beverage, pharmaceutical, and cosmetic applications and is FDA approved.
PH range: 0~14
Temperature: 260°C
Velocity: 0~20m/s
Pressure: 0~4MPa
Density: 1.4~1.6 g/cm3
PTFE PACKING
Asbestos PTFE Packing is formed by inter braided method from fine white asbestos yarn to foam very dense and flexible packing. Each thread is individually impregnated with PTFE lubricants.
PH range: 3~14
Temperature: 280°C
Velocity: 12m/s
Pressure: 3~20MPa
LEAD PACKING
Sealing with real lead seals is one of the most traditional sealing methods. The seals are made of lead for extremely reliable operation.
- PH range 0 – 14
- 1650°C Non oxidizing condition
- Temperature 650°C Steam
- 450°C Oxidizing condition -204°C Cryogenics
- Pressure 9~45MPa
- Velocity 2~15m/s
PTFE GRAPHITE PACKING
Graphite/PTFE line of compression packing products combine the heat dissipating characteristics of graphite with the chemical resistant and durability of PTFE. This combination makes this packing a versatile product for pumps and valves, and for rotating equipments such as mixers and agitators. Furthermore, these packings are great for sub-optimal mechanical conditions including pumps where there is an axial or elliptical shaft run out, worn pumps, and deflecting shafts.
- PH range 0~14
- Temperature 260°C
- Velocity 0~20m/s
- Pressure 0~4MPa
- Density 1.4~1.6 g/cm3
PURE GRAPHITE PACKING
Pure Graphite Packings are intended to offer high temperature capability, good chemical resistance and markedly reduced spindle wear.
Pure graphite packing is suitable for plant wide applications with excellent chemical and temperature resistance. Manufactured from expanded graphite for outstanding sealing ability.
- Suitable for high pressure, high temperature applications.
- Offering excellent sealing and operational reliability for both Original Equipment Manufacturers and plant users alike
- Fire-Safe
Technical Index for Pure Graphite Packin
- PH range 0~14
- Temperature -200~600°C
- Velocity 0~25m/s
- Pressure 5~25MPa
Other PTFE Products
- PTFE/Teflon Tape
- PTFE Skived Tape
- PTFE Skived Sheet
- PTFE Molded Sheet
- PTFE Molded Rod
- PTFE Extruded Rod
- PTFE/Teflon Cloth
Ammonia Packing
It is commonly used for sealing purposes in Cold Stores, & Ice Factories.
Available Brand: TBA
- Sizes:5mm to 12mm
Contact us
- Head Office: 57 Nishter Road, Lahore
- Branch Offices: Lahore, Islamabad, & Karachi
- info@mhshah.com.pk
- +92-423-7664489, +92-423-7665064
- +92-321-0070078, +92-321-0070079
Useful Links
Newsletter
Subscribe to our newsletter to stay updated on the latest news
Copyright @ 2023 MH SHAH. All Rights Reserved | Powered By DMT